Onsite Pro FS3/8CD Sink (Hot and Cold) FloodStop with 3/8 Inch Compression Valves

You looking to find the "Onsite Pro FS3/8CD Sink (Hot and Cold) FloodStop with 3/8 Inch Compression Valves" Good news! You can purchase Onsite Pro FS3/8CD Sink (Hot and Cold) FloodStop with 3/8 Inch Compression Valves with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $135.95    

Product Feature

• FloodStop System for Sink Basin
• Complete installation in less then 10 minutes
• Prevents leaks from becoming a major and costly problem

Product Description

Prevent water damage from leaking sinks, basins, or any other items that use 3/8" Compression fittings. This unit will detect a leak, sound an alarm, and automatically turn off the water supply to the offending appliance or pipe to prevent further damage. This unit can be easily installed in about 10 minutes. Your sink may be a disaster waiting to happen unless you have protection. FloodStop protects your home 24 hours a day everyday. FloodStop automatically shuts off the water supply to the Sink, whether caused by a ruptured supply line, leaking garbage disposal or an overflow. Incorporate the Flood Stop into your INSTEON or X10 network - the control unit has two NC outputs and plugs with 6" leads. Features: -The FloodStop valves are connected directly to the angle stops and supply lines -Sensors are placed at the base of the fixture -Valves stay open until water loss is detected -Water on sensor closes FloodStop valves and sounds alarm -Valves stays closed until problem is attended to and system reset

Onsite Pro FS3/8CD Sink (Hot and Cold) FloodStop with 3/8 Inch Compression Valves Review

In principle this is a great product - it saved me from a flood when my reverse osmosis system failed. It's also easy to install and use - by itself. If you install it in some difficult location, well, that's not its fault. I use one set in the kitchen and a second set (different part number) on the clothes washing machine.

In practice, things could be better. The build quality is highly variable; the most recent set purchased had one inside seal (around the ball valve) clearly deformed out of place. A simple visual inspection at the factory should have caught this critical problem. The previous set failed and started leaking, though it redeemed itself by setting off the alarm while I was at home and I could immediately shut off the supply. And with hot water the valves fail and need replacing roughly every two years; on cold supplies they last longer. (not entirely surprising...)

When I have contacted the actual manufacturer (Aqua-Managers, 949 362 2916) they were helpful about replacing broken parts. But free replacements don't make up for the labor time lost monkeying around under the sink; a product with higher build quality the first time, and every time, would get five stars. So, three stars.

Most of the consumer Reviews tell that the "Onsite Pro FS3/8CD Sink (Hot and Cold) FloodStop with 3/8 Inch Compression Valves" are high quality item. You can read each testimony from consumers to find out cons and pros from Onsite Pro FS3/8CD Sink (Hot and Cold) FloodStop with 3/8 Inch Compression Valves ...